The Linksys RE7000 extender setup connects your extender to the router’s network. To setup Linksys RE7000 extender, you should have a compatible router. In order to successfully complete the Linksys extender setup RE7000, make sure your router is updated to the latest firmware.
To go about the Linksys RE7000 setup, you can explore multiple methods. Mainly, there are two main methods to set up your new device and that are as follows:
- Linksys RE7000 setup WPS
- Setup via extender.linksys.com RE7000 web address
On this page, we will be discussing how to connect Linksys RE7000 to your router’s network in order to set it up. Make sure you read this post till the end in order to learn everything about the Linksys extender setup.
How to Prepare For Linksys RE7000 Extender Setup ?
In order to prepare your device fo the configuration, you need to meet certain requirements. These are not basically requirements, but you need to ensure that these points are fulfilled before you setup Linksys RE7000.
- You must know your router’s WiFi password
- Ensure that the router’s firmware is updated
- Locate a power outlet nearby the router
- An Ethernet cable (optional)
- A smartphone or PC
Linksys WiFi Extender RE7000 Setup via WPS
- Firstly, ensure that your router supports the WPS configuration.
- You can verify this by locating the WPS button on your device. If you can’t find the button, it means that your router does not support this configuration.
- To proceed with the Linksys RE7000 extender setup, power On your extender.
- Make sure you plug your device into a power outlet nearby the router.
- Let it boot up properly.
- Press the WPS button on the Linksys extender. Wait for a few seconds.
- After that, press the WPS button on the wireless router.
- Make sure you press button on both devices within 2 minutes or else the WPS configuration will fail.
- Finally, wait for a few seconds again.
- The Linksys RE7000 setup will complete successfully.
Linksys Extender Setup RE7000 via extender.linksys.com
The http extender linksys com RE7000 web address is dedicated to the Linksys extender. If you want to setup Linksys RE7000 extender using the web interface, you can use this URL. We suggest that you configure your extender using this method as it is more flexible and convenient method. You get numerous options to configure your device to your liking. Follow the steps below:
- Plug your extender into a power outlet nearby the router.
- Turn On your device and wait for it to become active.
- Connect your PC to the extender’s network.
- To connect to the network, you can use the default WiFi password.
- Launch an internet browser on your system and type https //extender.linksys.com RE7000 web address.
- The URL must be entered only in the address bar of the web browser.
- Press Enter and you will reach the Linksys RE7000 setup wizard.
- Follow the on-screen prompts to setup Linksys RE7000 wireless range extender.
- Once you are done with the setup, click Save or Apply.
Finally, the extender will reboot in order to make changes. Once it restarts, you can reconnect to the network and check whether the extender is working fine or not.
Why is My Linksys Re7000 Not Connecting?
In case you face issues while attempting to learn how to connect Linksys RE7000 extender, you can abort the process abruptly. However, it is important that you try to identify the sole cause of the issue. To help you with that, we have put down certain reasons that might be directly or indirectly responsible for the Linksys RE7000 extender setup issues.
- Linksys extender firmware outdated
- Power issues on your device
- Router not compatible with the extender
- Incorrect network password
- Incorrect web address
- Settings not saved
- Forced restart
How to Fix the Linksys RE7000 Setup issues ?
To fix the Linksys WiFi extender RE7000 setup issues, kindly follow the steps below:
- Firstly, ensure that the power outlet is working fine.
- Secondly, ensure that the router is updated to the latest firmware.
- Power On your extender once again and connect your PC to the network.
- Open a web browser and enter the correct web address.
- Do not enter the address in the search bar as it will only show you web results.
- After that, re-attempt to setup Linksys RE7000 extender.
- Keep following the on-screen prompts carefully in order to avoid any issues.
NOTE: Make sure you place your extender nearby the router or else the connectivity issue will show up on the device.
Final Thoughts
This page was all about the Linksys RE7000 extender setup and configuration. Setting up the Linksys wireless range extender is super easy and takes only a few minutes. We hope this page was helpful to you and that it helped you go about the Linksys WiFi extender setup RE7000.
If you get to see any issues while attempting to set up your extender or you just want an answer to your query, feel free to reach out to our support team for more help.