The Linksys WRT1900AC router is one of the leading contenders among the competitive routers which is engineered to give the best class network performance. You can certainly take your home network to new heights using this open-source router. Its configuration can be performed manually as well as using the setup CD. Get ready to learn more about the Linksys WRT1900ac router setup using linksyssmartwifi.com in the information mentioned below.
How to Setup Linksys WRT1900AC router using the Smart Setup wizard?
The Smart Setup guide feature is usually embedded in the firmware of the router and it is available even if the router is not working with an internet connection. Go through the steps mentioned below, to begin with, the Linksys WRT1900AC router setup:
- Firstly, connect the external antennas to the router and then plug them into the power source.
- In case the router possesses a power switch, ensure that it is in the ON position. You can wait until the power light indicator is in solid mode.
- Now, connect the modem to the router using an ethernet cable.
- If you are connecting to the router’s wifi for the first time, you don’t need the password.
- But, if you are configuring it for the second, you can locate these wifi credentials either at the bottom of the router or at the end.
- To avoid any future setup issues, just make sure that the adjustment of the devices is proper enough so that the signal from the router to the computer is good.
- This step is to be followed only in case of the wireless computers.
- Open any compatible web browser and input the default web address linksyssmartwifi.com in the address bar of the browser and press Enter.
- If you fail to access the setup wizard via the default gateway, you can use the default IP address in its place. The IP address is 192.168.1.1.
- You can tick the Checkbox given beside I have read and accepted the License Terms for using this software.
- Now, click on Next to proceed further.
- You can even bypass the Smart Setup Wizard and prefer to set up the router manually by clicking on the Manual Configuration link at the bottom.
- You will also notice that some Linksys Smart wifi routers have a checkbox I want to skip Setup and configure my router manually.
- Just tick this option and proceed to click Next.
You can follow the easy steps mentioned, to begin with, the manual installation of the Linksys WRT1900ac router setup.
Configuring the router settings
Various wireless advanced settings can be configured once you access the login and setup page. You can change them anytime you want by following the steps given below:
- Firstly, The Install future router updates automatically option is checked by default to allow for automatic updates. This is present under Updates for your router window. You can uncheck it as well and control the update process. You can also enable this option again after you log on to the web-based facility of the router. Now click on Next to proceed.
- Input the desired Wifi Name and Wifi Password in the fields given and then just click on Next.
- Connect to the new wifi Name now and return to setup and click on Next.
- Lastly, in the Create a router password field, input the router password and click on Next.
The router has been set up now. You can note the newly made changes somewhere and click on Next to complete the setup process.
Prerequisites before the Linksys WRT1900ac setup using the Linksys app
Before beginning with the Linksys WRT1900ac router setup, take note of the following instructions first:
- Firstly, make sure that you have the Linksys default wifi name and password ready.
- Also, ensure that your internet access is working.
- Power off the modem and check that you disconnect your existing router if you are thinking of replacing it.
- You can use the ethernet cable to connect the modem to the internet port of the router and plug the power adapter of both the modem as well as the new router.
Linksys WRT1900AC setup process via Linksys app
The Linksys router setup process using the Linksys app is a very convenient and easy-to-go method. Just make sure that you download the most latest version of the app and proceed with the Linksys wrt ac1900 setup process. Have a look at the quick installation steps mentioned below:
- Firstly, connect the mobile device to the router’s wifi.
- Now, launch the Linksys app and then choose the Launch setup.
- When you are asked to turn ON the Bluetooth, you can click on I would rather set up without Bluetooth.
- Now, tap on the Agree option of Terms and Conditions.
- You can select the Standard WiFi router when asked.
- Just ensure that you finish the steps as instructed and click on the Find My Router option once you are done.
- Proceed after tapping on the Continue option.
- You can check the boxes and then select Next.
- You must have your automatic updates option turned on. This can be changed later from the desktop browser and click on Next.
- You are free to customize the wifi settings and then click on the Next option.
- Just ensure that you connect to the new wifi name when asked. The setup process will resume after connecting to the new wifi name. Again tap on Next.
- You can also create an admin password for the router in the field. Tap on Next after scrolling down.
- Take note of the router settings and click on Next.
- You can create a Linksys server account by clicking on Next. In case you already have an account, you can tap on the Sign In option instead.
- Just input the Email address and password and then tap on the login. Button. You can click on Create an Email Login if you don’t have an account.
- Lastly, tap on OK and complete the setup process.
How to access the web-based setup page of the router?
You can access the web-based setup page of the router to configure some of the very advanced settings of the Linksys router. Follow the series of instructions given below to access the web interface of the router:
- Firstly, open any compatible browser on your device and input the default gateway linksyssmartwifi.com or the default IP address 192.168.1.1 in the address bar of the browser.
- Fill in the login credentials when the login window pops up.
Once you access the login page, you are free to change the wireless setting of your router.
How to change the basic wireless settings of the Linksys Smart router?
The need to change the router’s wireless channel may arise when you experience interference in the home network and this may be due to the following reason:
- Due to the presence of the electronic devices like cordless phones, microwave ovens, etc in the home
- The interference from the wireless network of the neighboring homes.
- The physical obstructions caused by the walls, mirrors and even the glass.
- Lastly, the location or the distance issues.
These factors are highly responsible for the reduction in the network’s performance. The ultimate solution is to resolve the issue of the intermittent signal and optimize the wireless connection. You can configure the wireless network to make sure that the network is not prone to unnecessary intrusions. Go through the instructions given below to check the wireless settings of your Linksys Smart wifi router through the local access interface:
- Start by accessing the Linksys Smart wifi router’s local access interface using a compatible browser.
- Now select the Wireless Tool option under the Router Settings on the left navigation pane.
- You will see the network wireless settings being displayed. Also, remember that the network wireless password is always different from the router password.
- Now, click on Edit on the network which you wish to configure.
- Fill in the new Network name SSID and the Password after clicking on the Enabled checkbox. The password you are going to use is case-sensitive.
- You can choose the Network mode that you wish to enable.
- You can select the network’s Security mode now.
- After that, choose the Channel width and the Wireless Channel.
- Lastly, click OK.
Conclusion
Linksys WRT1900ac router setup does not require any prior technical knowledge. But still, if you want complete and detailed information about the Linksys wrt ac1900 setup process, call our team of experts now for immediate help. They will provide an easy solution to your problems.