How to Setup Linksys Velop AX4200 Wifi 6 Mesh System?

How to Setup Linksys Velop AX4200 Wifi 6 Mesh System?

It seems like you are searching for ways to setup Linksys velop ax4200 wifi 6 mesh system. We got to say – really nice purchase.

This intelligent home wifi 6 mesh system has complete caliber in providing network stability and coverage at both places, your home and at your office. Setup Linksys velop ax4200 wifi 6 mesh system will extend the range of your domestic network to 8100 square feet.

This boosted tri-band network has advanced security features with a 1.4GHz quad-core processor. The three bands boost the network with the speed of 600Mbps, 1200Mbps, and 1200Mbps consecutively.

Velop mesh wifi system is compatible with the fourth, fifth, and sixth generation of wifi – so we can say the periphery is widened enough. One more thing internal antennas make the device less vulnerable and more efficient in usage.

Towards more reasons why setting up a Linksys, ax4200 is a real good idea; amongst them, one is stability because the tri-band mesh wifi system provides a persistent stable network all around the place.

Another thing is the setup of Linksys velop ax4200 is easy and simple; you don’t even need any assistance in its configuration. It’s a single-person job, so hop on then.

Setup Linksys velop ax4200 wifi 6 mesh system

The setup of this tri-band mesh wifi 6 system can be done through three major means, and those are as follows –

  • Via Linksys Application
  • Web-based setup

Check underneath the Linksys velop device – a username and password are mentioned there. That is your velop ax4200 network’s SSID.

Before rushing to any kind of setup, follow these steps –

Steps Before Configuration

  1. Press the reset button under the velop device and release it within 6 to 10 seconds, after the red light pulsates three times. It will reset the device.
  2. Power off and then power on the home router. Power cycling your network device is important, if your router has batteries in it. Take them out and install them back in. 
  3. Establish a successful connection between the home router and the velop system by using an Ethernet cable or you can use the WPS or sync button for this connection. 

Application-based setup 

The application is available on both Apple App Store and Google Play. So opt for the options fit for your convenience. The instructions stay the same for both methods.

App Store – https://apps.apple.com/us/app/linksys/id533516503
Google Play – https://play.google.com/store/apps/details?id=com.cisco.connect.cloud&hl=en_IN&gl=US

  1. Download the app. on your device and run installation.
  2. A login option appears on your screen as you open the app. We are considering you are new to Linksys, so select the option of account creation. In case you are already a member, then login usually.
  3. Time to enter your details in the creation of a new account and then log in to your newly created account.
  4. Once you enter your account, you must be looking at the dashboard of Linksys.
  5. The top left corner has all the setting options.
  6. From there, go to Wi-Fi settings and tap on it.
  7. Enter your Wi-Fi Name and password. Further reach towards option ‘Connect a Device with WPS’ by scrolling down.
  8. Enter the option and tap on your WPS connection through the slider button.
  9. The application will take a minute or two for successful synchronization.

The velop mesh wifi 6 system setup via application is completed here. For a web-based setup, keep on reading further.

Web-based velop ax4200 wifi setup 

  1. Open the browser on your system or on your smartphone.
  2. Run the IP address 192.168.1.1 in the browser.
  3. Once done, you will see a page by Linksys showing the application download. There is an option on the page saying ‘Click Here. Click on that.
  4. A login page of Linksys will flash on your screen.
  5. Enter the password – admin. It is the default passcode.
  6. You have now entered the dashboard of your Linksys velop system ax4200.
  7. Go to the options mentioned under router settings. The first sub-option there is Connectivity. Click on it.
  8. It will lead you to further options; go to ‘Connection Type’ now. Select your connection type.
  9. Now, you may set the SSIDs for your velop mesh wifi system.
  10. End it by clicking on ‘Setup Node.’ This is the parent node.
  11. By now, there is a network in the air that you just named. In case you want child nodes, you can make them now by tapping on options called ‘add wired child nodes’ ‘add wireless child nodes.’
  12. Once you are done, click on apply and place the routers wherever you want. The only condition is that they all should be in each other’s network boundary to operate.

This is how you complete the Linksys velop AX4200 wifi setup by means of the web browser. In case the IP address 192.168.1.1 does not work, you may try the default web address for login that is linksyssmartwifi.com.

Guess what? Your velop wifi 6 system setup is completed successfully. So, enjoy your strong, extended internet network all around the house. Watch the movies and web series on your wish list and complete the quests of your favorite games.

Conclusion

But just in case you are still finding it hard to figure out the configuration, do not worry – just contact us. It will be an utmost privilege to help you.

All you need to do is drop us a text in the chat window mentioned on the website. We are available here 24×7 for your help in the mentioned cause.