The Linksys EA7500 gives a powerful wifi coverage experience as it is equipped with the latest wireless AC technology for online gaming and streaming simultaneously. You don’t need to possess a setup CD to install the router as its setup process is easier and simple. For detailed instructions on the setup and the login process of Linksys EA7500 using the information given below.

Linksys ea7500 Setup

Go through the set of instructions, to begin with the Linksys ea7500 installation process in detail:

• Firstly, in case you have a separate modem and a standalone router, disconnect it and remove the old router. If you possess a modem-router. You may leave it connected.
• After this, position the antennas in a straight-up manner and plug the router into a power source. Always make sure that the power switch is on.
• Now, connect the router to the modem or the modem router. For this, plug the one end of the internet cable included to the yellow internet port on the new router and plug the other end into the ethernet port of the router, if you have a modem. In the case of a modem router, plug it into any available port.
• Wait until the illuminated Linksys LED present on the router stops blinking. It should be solid white in the end.
• You can connect to the wifi name given in the Quick Start Guide that came along with the router.

Configuring the wireless settings for Linksys ea7500 Setup

Once the hardware installation process is finish, you can access the online setup wizard and proceed with the configuration of the settings using the Linksys router login process. Read the instructions given below for the same:

• Launch any compatible browser and input the default gateway Linksys Smartwifi.com in the web browser. You can also use the default IP address 192.168.1.1 as an alternative here, to begin with the setup process.
• Follow the screen instructions given to set up the Linksys account. You can configure the router from any device with an internet connection via LinksysSmartwifi.com.
• Some of the router settings which you can manage via the login process are as follows:
• You can change the Username and the password of the router.
• Next, in the line is setting up the Guest access.
• Thirdly, you may connect different devices to the network.
• You can check the internet connection speed anytime.
• Also, the configuration of parental controls can be done easily using the login process.

How to manually upgrade the firmware of the Linksys router ?

You can manually upgrade the firmware of the Linksys Smart wifi router to improve the functionality of the router and upgrade its security system. Follow the instructions given below, to begin with the firmware update process manually:

• Firstly, download the latest firmware version for the Linksys router on your computer.
• Now, log in to the Linksys cloud account and choose Connectivity.
• Click on Choose File button under the Basic tab in the Firmware Updates section.
• You may select the downloaded file and click on the Open option.
• After this, click on the Start button.
• Click Yes on the Update Firmware pop-up box. The router will start with the firmware update process.
• Click on OK when the Router Reboot screen will pop up.
• Finally, click OK when the Firmware update complete screen appears.

Hence, with this the router firmware upgrade process is successful.

Troubleshooting the router issues : Linksys ea7500 Setup

You might face various challenges, while Linksys ea7500 setup or while working on it. So, the troubleshooting guide given below will help you to resolve some of the challenges by giving easy solutions:

How to reboot the router using Linksys Smartwifi.com?

This is a very basic troubleshooting technique to counter many router-related issues. You can reboot the router easily using the steps mentioned below:

• Firstly, log into LinksysSmartwifi.com .
• Under the Router Settings option, you can click Troubleshooting.
• Now, you may click the Diagnostics tab and choose Reboot under the Reboot icon.
• The router will restart after tapping on Yes. Once the router restarts, all the devices connected to the router will lose the internet connection and will reconnect automatically.

How to reboot the router using the Power Cord?

To reboot the router using the power cord, follow the instructions given below:

• Start by disconnecting the power cord from the router and the modem.
• Wait until 10 seconds and reconnect the power cord to the modem again. It must have power available.
• When the modem’s online indicator stops blinking, reconnect the power cord to the router again.
• Finally, wait until the light on the top of the router stops blinking. You can wait for two minutes now before connecting to the internet from the computer.

When you get the Internet cable is not plug in message

If you encounter Your Internet cable is not plug in message while setting up the router, follow the instructions given below to resolve the error:

• Firstly, ensure that the ethernet cable supply with the router is plug in securely to the yellow internet port on the back of the router. Also, check if it is plug into the appropriate modem port.
• The modem must be connect to the power source properly and it should be turn On.
• If you are using the cable internet service, just verify that the cable modem’s CABLE port is connect to the coaxial cable given by the ISP.
• In case you are using the DSL internet service, ensure that the DSL phone line is connect to the modem’s DSL port.
• Disconnect the USB if the computer was previously connected to the modem via the USB cable.
• Lastly, you can try to install the router again.

Why am I unable to access the router message?

It is important to connect with the router’s network to access the router. If you have wireless internet access, you might connect to a different wireless network accidentally. To fix this error, follow the steps given below:

• Start by choosing the Wireless icon in the system tray. You will notice the available network list.
• After choosing the network name. Click Connect.
• You will be prompt to fill in the network security key. Type the password into the network security field and press OK. The computer will automatically connect to the network and hence you can access the router easily now.

Why does the internet appear to be unavailable?

You may also experience trouble while connecting to the router and you might receive a Cannot find Internet address message on the web browser. There may be issues with the ISP if you know that the internet address you are entering is correct and you have tried several times. In this case, you may go for the following solutions:

• Firstly, make sure that the network and the power cables are connect secure.
• The power outlet to which the router is connect should have sufficient power.
• You can also go for rebooting the router.

Other troubleshooting tips for the unsuccessful router setup

• Try to disable the computer’s firewall and uninstall the antivirus software temporarily.
• Maybe the issue lies with the computer. So, use any other device to install the router again.
• If you are using a wired connection, make sure that they are damage-free.
• Reset the router in the end if nothing works.

How to Reset the Linksys ea7500?

You can reset the Linksys router at the end if you fail to succeed in the above-mentioned troubleshooting tips. . follow the instruction if you have to reset the Linksys router:

• Press the reset button present on the router with the help of the paper clip or pin.
• You can keep pressing it for at least 10 seconds until the light starts blinking.
• The router will reboot to factory defaults finally.

Conclusion

The Linksys ea7500 setup and login process using the LinksysSmartwifi router has been explaining above in a simple and straightforward manner. If you have any issues with the Linksys router setup process, reach out to our experts on the toll-free number now.